Tag Archives: SDN Training
HP-VAN-SDN-Controller-v2-3

HP VAN SDN Controller v2.3 released

HP VAN SDN Controller version 2.3 released HP released an updated version of the HP VAN SDN Controller on the 30th of July 2014. This is the third release of the controller in the last 9 months and adds more features. This is a very short introduction – I will be creating more blog entries […]

HP SDN Links

HP SDN and OpenFlow related links:

HP SDN and OpenFlow related links: Here are some useful HP SDN and OpenFlow links and documents. It can sometimes be difficult to find good information, so here is a starting point. I will update this as things develop. Please feel free to contact me with updates you think are good. Some products like Mininet […]

openflow-hp-comware-5500

OpenFlow configuration: HP Comware 5500 switches with the HP VAN SDN Controller

HP Comware switches have supported OpenFlow from late 2013 on HP 5900 switches running Comware7. OpenFlow is now also supported on A5500-EI switches running Comware 5.20 release R2221 as well as A5500-HI switches running Comware 5.2 release R5501. The release date for some of this the was last few days of December 2013. Click here […]

OpenFlow on HP Comware switches

OpenFlow configuration: HP Comware 5900 switches with the HP VAN SDN Controller

In this blog entry I’ll show you how to get a basic OpenFlow network working using HP 5900 Comware switches and the HP VAN SDN Controller. HP announced support for OpenFlow on the Comware 5900 series switches towards the end of 2013. The 5900 switches support OpenFlow 1.3.1. These switches require Comware version 7.1 and […]

OpenFlow configuration HP ProVision switches with the HP VAN SDN Controller

OpenFlow configuration: HP ProCurve switches and the HP VAN SDN Controller

In this blog entry I’ll show you how to get a basic OpenFlow network working using HP ProVision switches (formally ProCurve and E-Series)  and the HP VAN SDN Controller. See this blog entry for the configuration of HP Comware switches. See other blog entries for more complicated topologies. This is a simple topology of two 3500yl switches […]

Mininet and the HP VAN SDN Controller

Mininet is a network emulator that can create and emulate an entire OpenFlow network locally on your PC. This is similar in concept to network emulators such as Simware (HP Comware) or GNS3 (Cisco IOS). Mininet allows you to create different topologies consisting of OpenFlow switches and hosts (end devices). Topologies can vary from a single […]

wireshark

HP VAN SDN Controller – Wireshark install and configuration

Overview The HP SDN VAN Controller runs on the Ubuntu operating system. It is thus important for HP network engineers to know basic Ubuntu commands for installing and configuring the HP Controller. Here are some basic commands that engineers may find useful. Note: Commands in the output below are in bold and highlighted in yellow. […]

HP VAN SDN Controller – Dependencies

Overview The HP SDN VAN Controller runs on the Ubuntu operating system. It is thus important for HP network engineers to know basic Ubuntu commands for installing and configuring the HP Controller. Here are some basic commands that engineers may find useful. Note: Commands in the output below are in bold and highlighted in yellow. […]

HP VAN SDN Controller – IP Addressing

Overview The HP SDN VAN Controller runs on the Ubuntu operating system. It is thus important for HP network engineers to know basic Ubuntu commands for installing and configuring the HP Controller. Here are some basic commands that engineers may find useful. Note: Commands in the output below are in bold and highlighted in yellow. […]

HP VAN SDN Controller – SSH

HP VAN SDN Controller – SSH

Overview The HP SDN VAN Controller runs on the Ubuntu operating system. It is thus important for HP network engineers to know basic Ubuntu commands for installing and configuring the HP Controller. Here are some basic commands that engineers may find useful. Note: Commands in the output below are in bold and highlighted in yellow. […]